I am also a little obsessed with trees this year. I had plans to get crazy with little vignettes of trees everywhere...well, it did not happen...yet (Every year I am crafting and creating until the last minute...well, I still have 6 days left...so technically not the last minute, right? I still have time.)
Anyway, I still LOVE my trio of trees from last year, but had to make more trees!! Now these trees are very different than last years trees...
THESE ARE SO EASY TO MAKE.
It took me about 30 minutes to make them all!
SUPPLIES
- 3 - Styrofoam Crafts 5 7/8" Cones
- 1 Sheet Canvas Corp Chalk Stock
- Gorilla Glue Super Glue
- 1 box floral pins with pearl head (you may or may not use the entire box - I used about 20 per tree)
- Cotton fabric - I used scraps around the house. You only need about 1/4 yard
- 6 - Skewers (or 3 - skewers and 3 - Toothpicks)
- 3 - Pearls or beads
Glue stick
If you can rip and pin/stick things in Styrofoam...
you can do this craft
1. Lay fabric flat and make 1/2″ cuts about every 1/2″ along the selvage of the fabric
2. Rip fabric using the small cuts as the starting points
(There will be lots of strings and frayed edges – and that is good!)
3. At the base of a cone use a floral pin to secure a strip of
fabric. Begin wrapping that strip of fabric all around the cone,
overlapping edges slightly.
4. When you reach the end of a strip, grab another strip and secure the
first strip to the second strip with a fabric pin – just stick in the
Styrofoam, being sure to secure the end and beginning of the strips.
5. Continue to wrap until you are finished (I used about 2 strips per
cone for wrapping..if you use a larger cons, you will need more
strips.) when you reach the top wrap around the top to cover the
Styrofoam (you will be placing a toothpick in here so, try to keep a
little space open in the center to poke this in). Secure the strip to
the top with a pin.
6. You can be done if you want..or I used one more strip – secure to
the top with a floral pin (you can secure it using the pin you just
inserted to finish off the wrapping). Twist this strip of fabric and
then wrap around the tree, like a garland – you are not wrapping to cover
just to accent. Finish off the end with a floral pin.
7. Decorate the tree with floral pins – by using the pearl headed
pins to secure the fabric, you are also decorating, so just keep doing
it.
8. Place a skewer in the bottom center of the cone. You can then
place the trees in anything you want. I kept my skewers long and used my
milkglass vases to display them. You can grab some floral foam and tuck
them into many different types of containers.
Add some FUN with Sweet Little Pennants of JOY!!
Now, I made 3 trees and wrote JOY on the pennant,
but these are easily adaptable to any wording and so EASY to finish.
You need:
skewer or toothpick
chalkstock or heavier paper
pearl (with hole) or other embellishment
Gorilla Glue Super Glue
Glue Stick
Place small drops of Gorilla Glue Super Glue on the tip of the skewer and then place pearl/bead on the point (insert the point into the pole).
Cut 3 pennant triangles on the fold in chalkstock (I used my
decorative edge scissors to cut the edges). My triangles are 2″ wide at
the top/fold and 3″ long.
7
Place glue allover the inside of the pennant, place skewer in the fold; press both sides of chalkstock together.
Cut (or I just broke them) the skewers to the desired size, at least a few inches long.
When dry, insert into the top of the cone…I mean tree!
What are you lovin' this holiday season?
disclosure: some products were received via my affiliation with The DIY Club. See me full disclosure by clicking on disclosure in the top navigation bar
This post is written and created at
504 Main by
Holly Lefevre
CONTINUE READING
